Understand live spec checks
What errors, warnings and info notes mean, where you see them, and how to fix the common ones.
CoreIncluded in every plan
Hexy Spec checks your spec while you build it. About 30 rules look for missing information, parts that do not fit, wasted print sheets and finish combinations that do not work. You see problems before the factory does.
Three levels
| Level | Meaning | Can you send the RFQ? |
|---|---|---|
| Error (red) | Something is missing or impossible, for example a quantity of 0 or a board that does not fit in the box | No. Fix all errors first. |
| Warning (orange) | A likely problem, for example a tight box or a finish with poor contrast | Yes. The send window lists them. |
| Info (blue) | A hint that can save money or questions, for example "free" cards left on a print sheet | Yes. |
Where you see them
- Spec checks card on the right of the Components tab. It shows the first 8, sorted by level, with See all N checks below. When there are none, it shows All clear.
- A coloured dot on each component row with a problem. Hover over it to read the message.
- Inside the open component, with the one-click fix button.
- Checks on the Review & export tab: the full list. The Review & export tab label shows the count.
- In the PDF export under Validation issues.
- In the Send spec to the factory window: errors under Fix these first, warnings in a collapsed list ("you can still send").

Fix a problem
- Click the message in the Spec checks card. The component opens and scrolls into view.
- Read the message. It names the component and gives numbers, for example the inner size of the box.
- If there is a fix button (for example Set quantity to 1, Round up to 32 pages, Resize box to …, Use matte lamination), click it.
- Otherwise change the field yourself. The check updates at once.
Common checks and what to do
| Message starts with… | What to do |
|---|---|
| "… has quantity 0" | Set how many go into one copy, or remove the component. |
| "… is missing …" | Fill the named required fields. |
| "… per sheet: you use … of … on the last sheet" | Round the card count up. The extra cards cost almost nothing. |
| "saddle-stitched booklets need a page count divisible by 4" | Round the pages up, or change the binding. |
| "… does not fit …" / "is a tight fit in …" | Make the box bigger or the component smaller. Factories ask for a box at least 15 mm larger than every component inside. |
| "Components fill about …% of …" | The box is nearly full. Leave room for the insert and lid. |
| "No card component fits inside …" / "cards stack to …" | Check the tuck box size and depth against your cards (sleeved cards need more room). |
| "There is no game box in the spec" | Add a box so the factory can quote packaging and assembly. |
| "spot UV on gloss lamination…" | Pair spot UV with matte or soft-touch lamination. |
The full list is in Spec check rules reference.
Something wrong on this page? Write to studio@hexy.studio.