Hexy Tools · Game Design

Game Box Dieline Generator

Enter the inner size of your game box and the board you will use. You get a 1:1 artwork template with cut, fold, bleed and safe zones for every part, and a 3D preview of the folded box.

Checks

    Sizes are calculated from typical rigid-box and folding-carton construction. Confirm the final dieline with your factory before you finish the artwork.

    Need a 3D render of your box for the campaign page? Hexy Studio models and renders game boxes and components for Kickstarter and Gamefound. For the shipping carton around it, try Box Finder.

    Hexy 3D renders

    Basic: lid & base box and tuck box, PDF template, 3D preview · Pro: all box styles, factory presets, SVG and layered PDF, artwork fold & dpi check, PNG render · Compare plans

    How it works

    From inner size to artwork template

    Pick a style, enter the inside

    Measure what goes in the box (or the card stack) and enter that inner size. Choose the greyboard for rigid boxes or the paperboard caliper for a tuck box.

    We size every panel

    Board thickness, lid clearance, wrap-in over the rim, glue ears, tuck and dust flaps are added for you. The outer size of the closed box is shown at the top.

    Design on the template

    Download the 1:1 PDF: one page per part plus a legend. Arrows show which way is up on the finished box. Check your art on the 3D box before sending it.

    Tips from the print floor

    • Carry the background into the wrap-in. It folds inside the rim and shows when the box is open.
    • Keep text 3+ mm from folds. Folding drifts by about a millimetre; a title over an edge looks broken.
    • Put colour changes exactly on a fold or well away from it, never 1–2 mm next to it.
    • Lid clearance 1–1.5 mm lets the lid slide off without the box lifting with it; less feels tight once wrapped.
    • Base sides are usually hidden under a full-depth lid: a solid colour is fine and cheaper to proof.
    Pro

    Every box style, ready for the factory

    Pro comes with Hexy Tools Pro (all tools), monthly or yearly, cancel any time, or with the Campaign pass: 3 months, one payment.

    $99 / year or $10 / month

    • All box stylesDeck box with lid and thumb notches, book box with magnetic flap, sleeve and slipcase.
    • Factory presetsTypical wrap-in, board, bleed and clearance for common factories in one click.
    • SVG and layered PDFReal PDF layers (cut, crease, bleed, safe, labels) plus die-line-only pages; SVG per part for Illustrator, Inkscape or a cutter.
    • Artwork checkYour flat art on the 3D box, effective dpi, and warnings for text or colour edges too close to a fold.
    • PNG renderA transparent PNG of the 3D box for your pitch deck or backer update.
    FAQ

    Questions

    Which size do I enter: inner or outer?

    Enter the inner size: the space your components need, plus a little air (1–2 mm is typical for a rigid box, about 1 mm around a card deck). The tool adds the board thickness and the lid clearance and shows the outer size of the closed box.

    What is the wrap-in?

    On a rigid lid and base box the printed paper wraps over the top edge of the greyboard walls and continues inside. That inside strip is the wrap-in (also called turn-in), usually 15–20 mm. It shows when the box is open, so carry your background colour into it.

    Can I send this template to my factory?

    Use it to start your artwork and to check sizes, then ask the factory for their own dieline for your exact box and confirm it before final art. Every factory has its own board, paper, glue and machine tolerances, so their die is the one that counts.

    Why is the die-line magenta?

    The cut line uses a spot colour called CutContour (100% magenta, overprint), the common convention for die-cutting. Fold and crease lines are dashed cyan, bleed is red and the safe zone is dashed green. Keep these guides on their own layers and remove them from the printed art.

    How much bleed and resolution do I need?

    Most box factories ask for 3–5 mm bleed beyond the cut line and images of at least 300 dpi at final size. Pro checks your flat artwork for resolution and for text or colour edges that sit too close to a fold.

    What does a tuck box need for a card deck?

    Measure a stack of your cards (sleeved if you sell sleeves) and add about 1 mm to width and height. Paperboard of 0.35–0.45 mm caliper is typical; the tool adds the caliper to every panel so the deck still slides in after folding.